# Need Help-Capital Budgeting Problem

Need Help-Capital Budgeting Problem

Financial Management

Ford Company

Capital Budgeting Problem

The market value of Fords’ equity, preferred stock and debt are \$7 billion, \$3 billion, and \$10 billion, respectively. Ford has a beta of 1.8, the market risk premium is 7%, and the risk-free rate of interest is 4%. Ford’s preferred stock pays a dividend of \$3.5 each year and trades at a price of \$27 per share. Ford’s debt trades with a yield to maturity of 9.5%. What is Ford’s weighted average cost of capital if its tax rate is 30%?

 Ford Company Market Capitalization Weight Equity (E) Preferred (P) Debt (D) Total

 Ford Company Weight Cost After-tax Marginal Weight Equity (E) X = Preferred (P) X = Debt (D) X = Total X =

Need Help-Capital Budgeting Problem

# Physics 211L- Lab#5: NEWTON’s SECOND LAW OF MOTION

Physics 211L- Lab#5: NEWTON’s SECOND LAW OF MOTION

Physics 211L

Peter Webb

September

Lab#5: NEWTON’s SECOND LAW OF MOTION

Abstract:

In this lab we are Verifying Newton’s 2nd Law of motion, we are also finding the acceleration using the derived equations  and which are both derived with the free body diagrams on the attached paper. We used a computer with logger pro, Rotary motion sensor (RMS), and rolling cart with wired force probe, cart track, table clamp, long rod, 5 gram and 10 gram masses.

Our results showed that the force acting on an object is proportional to the mass. This is shown when we increase the mass from 5g to 10g the force measured and the theoretical force nearly doubled as well. This proves Newton’s 2nd law of motion. Possible reasons for error would be caused by neglecting friction and the track not being perfectly straight and level.

Procedure:

The first thing we did is cleaning the track and wheels to make sure that the motion is smooth; we recorded the mass of the cart including the force probe which was 650.6 g and the mass of the string which was 3.3 g, then we added mass to the cart so that the total mass was equal to 1 kg .We used the RMS and the force gauge to collect data on Logger Pro. The force gauge was attached to the cart this combined weight became “M” and the weight hanging off the end of the RMS was “m”. The data collected from Logger Pro from both the force gauge and the RMS are shown below in Table 1 along with the comparison to the theoretical values with percent error and standard deviation for the 5g tests. The data collected from Logger Pro from both the force gauge and the RMS are shown below in Table 2 along with the comparison to the theoretical values with percent error and standard deviation for the 10g tests.

Data Tables and Plots/Results and error analysis:

Table 1:

 Test # Force Measured (N) Force Std dev. Force Theoretical (N) Force ∆% Acceleration Measured (m/s^2) Accel Std dev. Acceleration Theoretical (m/s^2) Acceleration ∆% 1 .046 .014 .049 6.12% .083 .004 .078 6.41% 2 .046 .006 .049 6.12% .056 .006 .078 28.21%

Table 2:

 Test # Force Measured (N) Force Std dev. Force Theoretical (N) Force ∆% Acceleration Measured (m/s^2) Accel Std dev. Acceleration Theoretical (m/s^2) Acceleration ∆% 1 .090 .007 .084 7.14% .106 .004 .156 32.05% 2 .088 .007 .084 4.76% .114 .009 .156 26.92%

Trial 1:

Velocity vs time graph

Force vs time graph

Trial 2:

Velocity vs time graph

Force vs time graph

Physics 211L- Lab#5: NEWTON’s SECOND LAW OF MOTION

Trial 3:

Velocity vs time graph

Force vs time graph

# Comparative Efficacy and Safety of Major Classes of Anti-Hypertensive Agents on Vascular Outcomes in Type 2 Diabetes: a Network Meta-Analysis

Subject Medicine
Topic Comparative Efficacy and Safety of Major Classes of Anti-Hypertensive Agents on Vascular Outcomes in Type 2 Diabetes: a Network Meta-Analysis

Paper details

I want a network meta analysis paper and I have wrote the details proposal and I want your help to do literature research + data extraction + network meta analysis Please see the attached sample papers download from lancet. The client has access to necessary databases

# Need Help-MBS 518 Principles of Business Governance

Need Help-MBS 518 Principles of Business Governance

MBS 518 Principles of Business Governance

Assignment   Semester 2 2016

Edward and Johnny are brothers and love to sail together. They want to turn their sporting interest into a business. They then decided to start their own business called Everbright Sails Pty Ltd.

Edward and Johnny design and manufacture sails for all size yachts and supply wholesale to retail outlets. Their company becomes very successful and soon they need more sophisticated machinery to ensure that their business is profitable.

Edward’s cousin Julio is also in the manufacturing business, supplying plant and manufacturing equipment to factories. Julio is the sole director and marketing manager for the company Equipment Pty Ltd. On Monday Julio approaches his cousin Edward at a wedding function and offers to sell Everbright new sail making machinery that has been developed in France. Julio claims that the equipment will improve output and efficiency in the sail making factory by 30%. He said he is prepared to sell the equipment to them for only \$80,000. Julio said the offer will end on Friday at 5pm, and acceptance could be by email or post.

Edward and Johnny think that Julio’s offer is a very good and one which would enable Everbright to increase production and profit. Edward and Johnny are keen to accept Julio’s offer but feel that they really should try to negotiate better terms. On Tuesday Edward sends Julio an email on behalf of Everbright which states :

Everbright Sails is very interested in your offer. However we believe that the new equipment will only deliver a 15% profit return on capital, so we are only prepared to pay you the amount of \$50,000 for the machinery.

Julio happens to be on a three day conference on Tuesday, Wednesday and Thursday, so has not read his email. Meanwhile Edward and Johnny have reconsidered their position and are feeling nervous that they may have missed the deal because they have not heard back from Julio. They decide to accept Equipment Pty Ltd’s original offer and on behalf of Everbright post Julio a letter on Friday morning agreeing to purchase the French machinery for \$80,000. Just to be sure, at the same time they email Julio. Due to problems with Equipment Pty Ltd ISP, the email is not received into Equipment Pty Ltd’s system until 6pm Friday.

Over the weekend Julio meets with his old friend Jack who happened to be in the market for the same French sail making machinery. Julio owes Jack a favour so wants to give the machinery to Jack instead of selling it to Everbright. On Monday morning, Julio reads his email and opens the post. He calls Edward and Johnny and says the deal is off. Edward and Johnny are very upset and want to force Julio to sell them the French machinery.

What are the risk factors involved in the above negotiations :

Students with family name A to K : Advise, using appropriate objective references,  Edward and Johnny (Everbright P/L) as to whether or not a contract exists with Julio (Equipment P/L)

Students with family name L to Z : Advise, using appropriate objective references, Julio (Equipment P/L)as to whether or not a contract exists with Edward and Johnny (Everbright P/L).

This assignment is worth 40 marks

See pages 12-14 of the UILG for more details

Need Help-MBS 518 Principles of Business Governance

# SEC 4320 – Unit 4 Assessment

SEC 4320 – Unit 4 Assessment

Question 1

What will you review within the System/Applications Domain as part of your security assessment?

(Your response should be at least 200 words in length. You are required to use at least your textbook as source material for your response. All sources used, including the textbook, must be referenced; paraphrased and quoted material must have accompanying citations.)

Input Answer for question 1 here

Question 2

What will you review and assess in the User Domain as part of this security assessment?

(Your response should be at least 200 words in length. You are required to use at least your textbook as source material for your response. All sources used, including the textbook, must be referenced; paraphrased and quoted material must have accompanying citations.)

Input Answer for question 2 here

Please follow the instructions that I provided on the attached documents to complete the order and avoid any revisions     (See attachment for more information)

• No textbook used for this course. Various articles, Power points, and documents will be used instead
• Answer questions in the same order as the outline provided on the attachment. Treat them as mini essays. If there are 4 questions I need 4 separate answers.
• Unless otherwise indicated, there is a 200 word minimum response required per question. (The other document will have actual word requirement per question)
• All sources used, must be referenced; paraphrased and quoted material must have accompanying citations.
• NOT REQUIRED: title page, margins, header, double spacing, and hanging indentation, introduction and conclusion

# Architecture, Building and Planning

Architecture, Building and Planning Questions and Answers available

# Hypothesis Testing and Two-Sample Tests and One-Way ANOVA

Order Now for the complete paper here.

Continue to place your Order Now

Buy paper on this assignment here (Email us: support@customwritings-us.com)
Click: http://customwritings-us.com/orders.php to Make your Order.

Hypothesis Testing and Two-Sample Tests and One-Way ANOVA

QUESTION 1

9-15a

The quality-control manager at a light bulb factory needs to determine whether the mean life of a large shipment of light bulbs is equal to 375 hours. The population standard deviation is 120 hours. A random sample of 64 light bulbs indicates a sample mean life of 350 hours.

At the 0.05 level of significance, is there evidence that the mean life is different from 375 hours?

### QUESTION 2

9-15b

The quality-control manager at a light bulb factory needs to determine whether the mean life of a large shipment of light bulbs is equal to 375 hours. The population standard deviation is 120 hours. A random sample of 64 light bulbs indicates a sample mean life of 350 hours.

Compute the p-value. Please round to four decimal places.

### QUESTION 5

9-25a

A manufacturer of chocolate candies uses machines to package candies as they move along a filling line. Although the packages are labeled as 8 ounces, the company wants the packages to contain a mean of 8.17 ounces so that virtually none of the packages contain less than 8 ounces. A sample of 50 packages is selected periodically, and the packaging process is stopped if there is evidence that the mean amount packaged is different from 8.17 ounces. Suppose that in a particular sample of 50 packages, the mean amount dispensed is 8.159 ounces, with a sample standard deviation of 0.051 ounce.

Using a 0.05 significance level, is there evidence that the population mean amount is different from 8.17 ounces?

### QUESTION 6

9-25b

A manufacturer of chocolate candies uses machines to package candies as they move along a filling line. Although the packages are labeled as 8 ounces, the company wants the packages to contain a mean of 8.17 ounces so that virtually none of the packages contain less than 8 ounces. A sample of 50 packages is selected periodically, and the packaging process is stopped if there is evidence that the mean amount packaged is different from 8.17 ounces. Suppose that in a particular sample of 50 packages, the mean amount dispensed is 8.159 ounces, with a sample standard deviation of 0.051 ounce.

Compute the p-value. Please round to four decimal places.

### QUESTION 7

9-27a p1

The U.S. Department of Transportation requires tire manufacturers to provide performance information on tire sidewalls to help prospective buyers make their purchasing decisions. One very important piece of information is the tread wear index, which indicates the tire’s resistance to tread wear. A tire with a grade of 200 should last twice as long, on average, as a tire with a grade of 100.

A consumer organization wants to test the actual tread wear index of a brand name of tires that claims “graded 200” on the sidewall of the tire. A random sample of n = 18 indicates a sample mean tread wear index of 195.3 and a sample standard deviation of 21.4.

Please compute the test statistic (Hint: See formula 9.2). Please round to four decimal places.

### QUESTION 8

9-27a p2

The U.S. Department of Transportation requires tire manufacturers to provide performance information on tire sidewalls to help prospective buyers make their purchasing decisions. One very important piece of information is the tread wear index, which indicates the tire’s resistance to tread wear. A tire with a grade of 200 should last twice as long, on average, as a tire with a grade of 100.

A consumer organization wants to test the actual tread wear index of a brand name of tires that claims “graded 200” on the sidewall of the tire. A random sample of n = 18 indicates a sample mean tread wear index of 195.3 and a sample standard deviation of 21.4.

Using a 0.05 level of significance, please provide the critical value for the appropriate test. Please round to four decimal places.

### QUESTION 10

9-27b

The U.S. Department of Transportation requires tire manufacturers to provide performance information on tire sidewalls to help prospective buyers make their purchasing decisions. One very important piece of information is the tread wear index, which indicates the tire’s resistance to tread wear. A tire with a grade of 200 should last twice as long, on average, as a tire with a grade of 100.

A consumer organization wants to test the actual tread wear index of a brand name of tires that claims “graded 200” on the sidewall of the tire. A random sample of n = 18 indicates a sample mean tread wear index of 195.3 and a sample standard deviation of 21.4.

### QUESTION 19

9-47a p1

In a recent year, the Federal Communications Commission reported that the mean wait for repairs for AT&T customers was 25.3 hours. In an effort to improve this service, suppose that a new repair service process was developed. This new process, used for a sample of 100 repairs, resulted in a sample mean of 22.3 hours and a sample standard deviation of 8.3 hours.

Please compute the test statistic (Hint: See formula 9.2). Please round to four decimal places.

### QUESTION 20

9-47a p2 (Please note this is part b in the textbook)

In a recent year, the Federal Communications Commission reported that the mean wait for repairs for AT&T customers was 25.3 hours. In an effort to improve this service, suppose that a new repair service process was developed. This new process, used for a sample of 100 repairs, resulted in a sample mean of 22.3 hours and a sample standard deviation of 8.3 hours.

### QUESTION 21

9-47a p3

In a recent year, the Federal Communications Commission reported that the mean wait for repairs for AT&T customers was 25.3 hours. In an effort to improve this service, suppose that a new repair service process was developed. This new process, used for a sample of 100 repairs, resulted in a sample mean of 22.3 hours and a sample standard deviation of 8.3 hours.

Using a 0.05 level of significance, please provide the critical value for the appropriate test. Please round to four decimal places.

### QUESTION 23

9-49 p1

You are the manager of a restaurant that delivers pizza to college dormitory rooms. You have just changed your delivery process in an effort to reduce the mean time between the order and completion of delivery from the current 25 minutes. A sample of 36 orders using the new delivery process yields a sample mean of 22.4 minutes and a sample standard deviation of 6 minutes.

Please compute the test statistic (Hint: See formula 10.2). Please round to four decimal places.

### QUESTION 24

9-49 p2

You are the manager of a restaurant that delivers pizza to college dormitory rooms. You have just changed your delivery process in an effort to reduce the mean time between the order and completion of delivery from the current 25 minutes. A sample of 36 orders using the new delivery process yields a sample mean of 22.4 minutes and a sample standard deviation of 6 minutes.

### QUESTION 25

9-49 p3

You are the manager of a restaurant that delivers pizza to college dormitory rooms. You have just changed your delivery process in an effort to reduce the mean time between the order and completion of delivery from the current 25 minutes. A sample of 36 orders using the new delivery process yields a sample mean of 22.4 minutes and a sample standard deviation of 6 minutes.

Using a 0.05 level of significance, please provide the critical value for the appropriate test. Please round to four decimal places.

### QUESTION 27

9-55a p1

The U.S. Department of Education reports that 46% of full-time college students are employed while attending college. (Data extracted from “The Condition of Education 2009,” National Center for Education Statistics, nces.ed.gov.) A recent survey of 60 full-time students at Miami University found that 29 were employed.

Please compute the test statistic (Hint: See formula 9.3). Please round to four decimal places

### QUESTION 28

9-55a p2

The U.S. Department of Education reports that 46% of full-time college students are employed while attending college. (Data extracted from “The Condition of Education 2009,” National Center for Education Statistics, nces.ed.gov.) A recent survey of 60 full-time students at Miami University found that 29 were employed.

### QUESTION 29

9-55a p3

The U.S. Department of Education reports that 46% of full-time college students are employed while attending college. (Data extracted from “The Condition of Education 2009,” National Center for Education Statistics, nces.ed.gov.) A recent survey of 60 full-time students at Miami University found that 29 were employed.

Using a 0.05 level of significance, please provide the critical value for the appropriate test. Please round to four decimal places.

### QUESTION 61

10-07a

When people make estimates, they are influenced by anchors to their estimates. A study was conducted in which students were asked to estimate the number of calories in a cheeseburger. One group was asked to do this after thinking about a calorie-laden cheesecake. A second group was asked to do this after thinking about an organic fruit salad. The mean number of calories estimated in a cheeseburger was 780 for the group that thought about the cheesecake and
1,041 for the group that thought about the organic fruit salad. Suppose that the study was based on a sample of 20 people who thought about the cheesecake first and 20 people who thought about the organic fruit salad first, and the standard deviation of the number of calories in the cheeseburger was 128 for the people who thought about the cheesecake first and 140 for the people who thought about the organic fruit salad first.

State the null and alternative hypothesis if you want to determine whether the mean estimated amount of calories in the cheeseburger is lower for the people who thought about the cheesecake first than for the people who thought about the organic fruit salad first

### QUESTION 62

10-07b

When people make estimates, they are influenced by anchors to their estimates. A study was conducted in which students were asked to estimate the number of calories in a cheeseburger. One group was asked to do this after thinking about a calorie-laden cheesecake. A second group was asked to do this after thinking about an organic fruit salad. The mean number of calories estimated in a cheeseburger was 780 for the group that thought about the cheesecake and
1,041 for the group that thought about the organic fruit salad. Suppose that the study was based on a sample of 20 people who thought about the cheesecake first and 20 people who thought about the organic fruit salad first, and the standard deviation of the number of calories in the cheeseburger was 128 for the people who thought about the cheesecake first and 140 for the people who thought about the organic fruit salad first.

In the context of this study, what is the meaning of the Type I error and Type II error?

### QUESTION 81

10-21a p1

In industrial settings, alternative methods often exist for measuring variables of interest. The data in Measurements.xls (coded to maintain confidentiality) represent measurements in-line that were collected from an analyzer during the production process and from an analytical lab.

Is there evidence of a difference in the mean measurements in-line and from an analytical lab? Please compute the test statistic (Hint: See formula 10.3). Please round to four decimal places.

### QUESTION 82

10-21a p2

In industrial settings, alternative methods often exist for measuring variables of interest. The data in Measurements.xls (coded to maintain confidentiality) represent measurements in-line that were collected from an analyzer during the production process and from an analytical lab.

Is there evidence of a difference in the mean measurements in-line and from an analytical lab? Please determine the p-value. Please round to four decimal places.

### QUESTION 83

10-21a p3

In industrial settings, alternative methods often exist for measuring variables of interest. The data in Measurements.xls (coded to maintain confidentiality) represent measurements in-line that were collected from an analyzer during the production process and from an analytical lab.

Is there evidence of a difference in the mean measurements in-line and from an analytical lab? Please provide the critical value for the appropriate test. Please round to four decimal places.

### QUESTION 84

10-21a p4

In industrial settings, alternative methods often exist for measuring variables of interest. The data in Measurements.xls (coded to maintain confidentiality) represent measurements in-line that were collected from an analyzer during the production process and from an analytical lab.

Is there evidence of a difference in the mean measurements in-line and from an analytical lab? (Use α = 0.05.)

### QUESTION 87

10-23a p1

In tough economic times, the business staff at magazines are challenged to sell advertising space in their publications. Thus, one indicator of a weak economy is the decline in the number of “ad pages” that magazines have sold. The file AdPages.xls contains the number of ad pages found in the May 2008 and May 2009 issues of 12 men’s magazines.

Is there evidence that the mean number of ad pages was higher in May 2008 than in May 2009? Please compute the test statistic (Hint: See formula 10.3). Please round to four decimal places.

### QUESTION 88

10-23a p2

In tough economic times, the business staff at magazines are challenged to sell advertising space in their publications. Thus, one indicator of a weak economy is the decline in the number of “ad pages” that magazines have sold. The file AdPages.xls contains the number of ad pages found in the May 2008 and May 2009 issues of 12 men’s magazines.

Is there evidence that the mean number of ad pages was higher in May 2008 than in May 2009? Please determine the p-value. Please round to four decimal places.

Order Now for the complete paper here.

Continue to place your Order Now

Buy paper on this assignment here (Email us: support@customwritings-us.com)
Click: http://customwritings-us.com/orders.php to Make your Order.

# Custom Essay writers

Where are we Based?

We are an academic assistance agency based in the US and open to the Global market.

How long have we been in the Market?

Our agency is a high quality writing service provider, whose establishment dates back to 2012. Our team is committed to providing all-time customized papers with exceptional authenticity to our customers from across the USA, Canada, Australia, UK and all other parts of the World.

• USA
• UK
• AUSTRALIA
• OTHERS

Our Support Team

Our teams who work in the Support department are highly-trained to answer to inquiries professionally and in a friendly way. The team is available 24/7.

Quote for Order

Simply fill your order details at Order Now  and notify us through our email writersestate@gmail.com. Make Payment through either Paypal or Skrill /Moneybookers (writersestate@gmail.com). Within the first 15 minutes, you will receive a notification through email, confirming we received the order and the payment. The most suitable writer who has done your discipline will be assigned to complete the order. We offer premium services to all our clients upon request.

As well you can make free inquiries on ‘How much to pay for your Order’ through our email; writersestate@gmail.com.  Our Support will guide you accordingly.

WHY CHOOSE US?

Best Quality

• Highly trained content writers and editors
• Highest Quality control
• 6 Six years writing experience

Convenience

• Consistent communication
• Simple process of placing your Order

Affordable Services

• Prices start at \$8 per page
• Average prices
• Discount plan for Returning Customers

Zero Plagiarism

Our services are exceptional, free of plagiarism.

## Our Values

Confidentiality

We guarantee all our clients confidential deals. We do not share your details either by disclosing private details to any institution, person or reusing any custom essay papers in the online platforms.

Authenticity

Order for ready custom sample papers, research papers, essays, term papers, dissertations, theses, Research projects book/movie reviews, reports, speeches, technical papers and other assignments.

Our Services

Essay draft: We create sample paper useful as reference.

Editing: Polishing a written paper through necessary amendments.

Research: We assist our customers to find reliable sources to your subject.

Formatting: We format your paper using citation styles such as APA, MLA, Harvard, Chicago and/orTurabian.

Articles: We write articles of different subjects.

Blogs: Appealing blogs and social media pages are necessary for your online sites. We write such blogs.

Web Content: We create website content of any audience.

Email Campaigns: We offer assistance in email marketing campaigns.

Landing Pages: Our writers are able to write texts for the landing pages; able to attract visitors.

Creation of Newsletters and News: We create newsletters to our clients depending on requirements provided.

Press Releases: We also write enticing news articles, corporate brochures and Presentations.

Proofreading and Editing: We offer proofreading and editing services on Books and ebooks of all genres, Academic papers (Research papers and Dissertations) at cheaper prices.

# Managerial Economics:

Buy Research paper on this assignment here (Email us: writersestate@gmail.com)

Managerial Economics

Complete Individual Problems 17-2 and 17-6 at the end of Chapter 17 in Managerial Economics: A Problem-Solving Approach. In addition, you are required to complete Group Problem G17-1: Uncertainty. As you are evaluating your current company, address the following decisions in your response (500-750 words):

What environmental factors and risks must be considered in the company’s decision-making process?
Evaluate costs factors influencing the company’s decision.
Determine strategies that would provide value to the outcome your company is seeking relating to this decision.
Prepare this assignment according to the guidelines found in the APA Style Guide, located in the Student Success Center.

An abstract is not required.

Buy Research paper on this assignment here (Email us: writersestate@gmail.com)

Simply Click ORDER NOW and your paper details. Our support team will review the assignment(s) and assign the right expert whose specialization is same to yours to complete it within your deadline. Our Editor(s) will then review the completed paper (to ensure that it is answered accordingly) before we email you a complete paper

Email Us for help in writing this paper for you at: support@customwritings-us.com

[The roadway intersection at Birch Avenue and Leroux Street has the same intersection geometry as other nearby intersections in downtown Flagstaff, Arizona. Leroux Street is a two-way road with stop control at the intersection of Birch Avenue. Birch Avenue is an uncontrolled, two-lane one-way road with heavier average daily traffic.] [According to a network screening conducted by the City of Flagstaff, the intersection of Birch Avenue and Leroux Street has an estimated collision rate of 2.1 collisions per every million entering vehicles. This estimated collision rate is greater than the industry standard acceptable collision rate of 1.0 collisions (or less) per million entering vehicles. Due to a collision rate of 2.1, the City of Flagstaff has identified Birch Avenue and Leroux Street as the most dangerous intersection within the network screening study limits.] [If Birch Avenue and Leroux Street do not undergo the redesign process, the intersection will continue experiencing a high collision rate that could potentially cause economic and physical harm to intersection users.] [This preliminary proposal report outlines the strategy that the Traffic Engineering Team, or Team, will use to redesign the intersection to improve its overall safety. Within acceptable safety limits, the Team will also optimize traffic efficiency. The Team will make a primary and secondary redesign recommendation in a final report.] To choose appropriate design recommendations, the Team reviewed the guidelines of the traffic engineering industry and the City of Flagstaff’s standards and policies. The Team will collect data on the current state of the intersection of Birch Avenue and Leroux Street and will analyze the data to assess the intersection’s current conditions. The Traffic Engineering Team will conduct a warrant analysis to mitigate the City of Flagstaff’s legal liability and will conduct a cost analysis to meet the City’s budgetary needs. Finally, the Team will choose appropriate primary and secondary redesign recommendations to submit to the City of Flagstaff. Some early design concepts for the intersection’s traffic control device are an all-way stop, a roundabout, or a traffic signal.